HIGH PERFORMANCE DISTRIBUTION AMPLIFIER, 1-100 MHz
The HPDA-15RMi-CW is a High Performance Distribution and Isolation Amplifier designed to distribute state-of-the-art atomic frequency standards. This amplifier is designed for maximum flexibility in a 1U, 19 inch rackmount enclosure that may contain up to three RF signal distribution modules, each providing five isolated outputs. All HPDA-15RMi-CW are equipped with LED monitors, every RF output signal is compared to a preset threshold: 0 dBm for 5 & 10 MHz and +5 dBm for 100 MHz. If the signal level on any output drops below the threshold, the monitor LED for the corresponding module turns off indicating a fault condition. The amplifier is designed to operate on AC and/or DC voltage.
- Features
- Applications
- Specifications
- Options
- 1 - 100 MHz
- Unity gain
- Low VSWR
- High isolation
- High output
- Low phase noise
- Low distortion
- Low temperature coefficient
- Atomic frequency standards
- Atomic time scales
- High performance testing facilities
- Laboratory frequency distribution
- Reference frequency distribution
|
|
|
HPDA-15RMi-CW HPDA-15RMi-C2W |
HPDA-15RMi-C1W HPDA-15RMi-C3W |
|
||||
|
PARAMETER |
CONDITIONS |
MIN |
TYP |
MAX |
MIN |
TYP |
MAX |
UNITS |
|
Bandwidth |
+/- 1 dB |
|
1 - 100 |
- |
|
1 - 100 |
- |
MHz |
|
Impedance |
Input Output |
- - |
50 50 |
- - |
- - |
50 50 |
- - |
Ohms |
|
Gain |
@ 10 MHz |
0 |
0.2 |
0.5 |
0 |
0.2 |
0.5 |
dB |
|
Output level @ 10 MHz |
1 dB Comp. |
17 |
18 |
- |
17 |
18 |
- |
dBm |
|
Return loss @ 10 MHz |
Input (S11) Output (S22) |
- - |
-35 -35 |
-30 -30 |
- - |
-35 -35 |
-30 -30 |
dB |
|
Distortion @ 10 MHz |
+13 dBm +17 dBm |
- - |
-48 -42 |
-45 -40 |
- - |
-45 -42 |
-40 -40 |
dBc |
|
Isolation @ 10 MHz |
Out to Out Out to In |
130 140 |
140 145 |
- - |
130 140 |
140 145 |
- - |
dB |
|
Phase noise @ 10 MHz |
1 Hz 10 Hz 100 Hz 1 kHz 10 kHz |
- - - - |
-155 -165 -167 -170 -171 |
-150 -160 -166 -170 -170 |
- - - - |
-150 -160 -166 -169 -169 |
-147 -157 -165 -167 -167 |
dBc/Hz |
|
Gain |
@ 10 MHz |
-1 |
-0.5 |
0.5 |
-1 |
-0.5 |
0.5 |
dB |
|
Output level @ 100 MHz |
1 dB Comp. |
16 |
17 |
- |
16 |
17 |
- |
dBm |
|
Return loss @ 100 MHz |
Input (S11) Output (S22) |
- - |
-13 -25 |
-10 -20 |
- - |
-13 -25 |
-10 -20 |
dB |
|
Distortion @ 100 MHz |
+13 dBm +17 dBm |
- - |
-33 -30 |
-31 -28 |
- - |
-33 -30 |
-31 -28 |
dBc |
|
Isolation @ 100 MHz |
Out to Out Out to In |
80 80 |
90 90 |
- - |
80 80 |
90 90 |
- - |
dB |
|
Phase noise @ 100 MHz |
1 Hz 10 Hz 100 Hz 1 kHz 10 kHz |
- - - - |
-136 -146 -154 -160 -161 |
-133 -143 -152 -158 -159 |
- - - - |
-136 -146 -154 -159 -160 |
-133 -143 -151 -156 -157 |
dBc/Hz |
|
Allan Deviation |
Averaging Time (s) 1 10 100 1000 10000 |
- - - - - |
4 E-14 5 E-15 2 E-15 6 E-16 4 E-16 |
5 E-14 7 E-15 3 E-15 1 E-15 5 E-16 |
- - - - - |
4 E-14 5 E-15 2 E-15 6 E-16 4 E-16 |
5 E-14 7 E-15 3 E-15 1 E-15 5 E-16 |
|
| Product Name | No. of Inputs | No. of Outputs | AC Operation | DC Operation |
|---|---|---|---|---|
| HPDA-15RMi-CW | 3 | 15 (five per input) | √ | √ |
| HPDA-15RMi-C1W | 1 | 10 | √ | √ |
| HPDA-15RMi-C2W | 2 | 10 (five per input) | √ | √ |
| HPDA-15RMi-C3W | 1 | 15 | √ | √ |