
1 PPS GENERATOR
The PPS-2 is used to generate one pulse per second signals from a sine-wave input signal. The input can be a 1 MHz, 5 MHz or 10 MHz signal. The pulse-per-second (pps) output has a variable pulse width. The input frequency selection and pulse width selections are configured via jumper settings. The output pps can synchronize with an external event. The synchronization is good to +/- 1/2 of the input clock cycle. The outputs are designed to drive low impedance loads and long 50 or 75-ohm cables. The channel-to-channel delay differences are less than 1 ns. The instrument is available in a 1U full rack mount enclosure and operates on 110/220 VAC. Optional DC operation option is available upon request.
- Features
- Applications
- Specifications
- Options
- External sync
- High stability
- Low input VSWR
- Low temperature coefficient: 3 ps/ºC
- Reference clock distribution
- Time synchronization
- 1 PPS generator
|
PARAMETER |
CONDITIONS |
MIN |
TYP |
MAX |
UNITS |
|
Rise time |
10
- 90 % |
- |
1.5 |
2 |
ns |
|
Fall time |
10
- 90 % |
- |
1.5 |
2 |
ns |
|
Differential
delay |
Channel
– Channel on
the same generator |
- |
200 |
500 |
ps |
|
Impedance |
Input |
- |
50 |
- |
Ω |
|
Output |
- |
10 |
- |
||
|
Input High
Level |
Input
signal into 50 Ω load |
2 |
- |
5 |
V |
|
Input Low Level |
Input
signal into 50 Ω load |
-0.7 |
- |
0.8 |
|
|
Output High
Level |
50
Ω load |
3 |
4 |
5 |
V |
|
Output Low
Level |
50
Ω load |
- |
0.1 |
0.2 |
|
|
Input Signal
Level |
1
MHz, 5 MHz, and 10 MHz |
0 |
7 |
15 |
dBm |
|
External Sync.
Error |
1 MHz |
- |
+/- 500 |
- |
ns |
|
5 MHz |
- |
+/- 100 |
- |
||
|
10
MHz |
- |
+/-
50 |
- |
||
|
Temperature-delay
Coefficient |
0 -
50 °C Reference
to 1 PPS |
- |
3 |
5 |
ps/°C |
| Part Number | Description | AC Operation | DC Operation |
|---|---|---|---|
| PPS-2RM-A | One generator, two outputs Rear panel connectors | ✓ | |
| PPS-2RM-A-DC | One generator, two outputs Rear panel connectors | ✓ | ✓ |
| PPS-2RM-B | Two generators, Two outputs per generator Rear panel connectors | ✓ | |
| PPS-2RM-B-DC | Two generators, Two outputs per generator Rear panel connectors | ✓ | ✓ |
| PPS-2RM-B1 | Two generators, Two outputs per generator FRONT panel connectors | ✓ | |
| PPS-2RM-B1-DC | Two generators, Two outputs per generator FRONT panel connectors | ✓ | ✓ |
