HPDA-15RMi-S

1-50 MHz AUTOSWITCH AMPLIFIER

The HPDA-15RMi-S is a high performance frequency distribution amplifier with an auto switch function that allows the selection of the RF input to be distributed. The selected RF input is buffered to provide ten unity gain outputs. In manual mode, the RF input can be selected with a toggle switch on the front panel, or by sending a command through the Ethernet interface. In autoswitch mode the two RF input levels are monitored and compared to a set threshold of +7 dBm. Upon failure of a selected input channel the amplifier switches over to the alternate RF input with a switching time less than 1 us.

  • Features
  • Applications
  • Specifications
  • 1-50 MHz Autoswitch
  • Remote Control through Ethernet port
  • Switching time: 1us
  • High isolation: 130 dB
  • High output: +17 dBm
  • Low phase noise:
    -147 dBc/Hz @ 1 Hz
    -171 dBc/Hz @ 10 kHz
  • Low distortion:
    -45 dBc @ 13dBm
  • Low temperature coefficient:
    1.5 ps/ºC
  • Telecommunication
  • High performance testing facilities
  • Laboratory frequency distribution
  • Reference frequency distribution
  • Timescales

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNITS

Max Input Level

1 dB compression

17

18

-

dBm

Min Input Level

No fault

7

8

-

dBm

Bandwidth

± 1 dB

1-50

0.5-65

-

MHz

Gain

@ 5 MHz

0

0.2

0.5

dB

Impedance

Input and output

-

50

-

Ohms

Return Loss

Input(S11)

-

-25

-20

dB

Output(S22)

-

-35

-30

Distortion

+13 dBm

-

-45

-42

dBc

Isolation

Output to output

130

140

-

dB

Output to input

140

145

-

Isolation

Input 1 to input 2

100

110

-

dB

Switching time

Autoswitch mode

-

0.5

1

us

Spurious

 

-

-

-100

dBc

Phase Noise

(Referred to the Input)

1 Hz

-

-147

-145

dBc/Hz

10 Hz

-

-157

-155

1 kHz

-

-167

-166

10 kHz

-

-171

-170

Temperature-delay

Coefficient

0 - 50 ºC

-

1.5

3

ps/ºC

Buying Options

HPDA-15RMi-S

Add to Quote

Download a pdf of the latest
SDI Product Catalog.